6 RStudio and Git/GitHub Setup and Motivation

6.1 Learning Objectives

In this lesson, you will learn:

  • What computational reproducibility is and why it is useful
  • How version control can increase computational reproducibility
  • How to check to make sure your RStudio environment is set up properly for analysis
  • How to set up git

6.2 Reproducible Research

Reproducibility is the hallmark of science, which is based on empirical observations coupled with explanatory models. While reproducibility encompasses the full science lifecycle, and includes issues such as methodological consistency and treatment of bias, in this course we will focus on computational reproducibility: the ability to document data, analyses, and models sufficiently for other researchers to be able to understand and ideally re-execute the computations that led to scientific results and conclusions.

6.2.1 What is needed for computational reproducibility?

The first step towards addressing these issues is to be able to evaluate the data, analyses, and models on which conclusions are drawn. Under current practice, this can be difficult because data are typically unavailable, the method sections of papers do not detail the computational approaches used, and analyses and models are often conducted in graphical programs, or, when scripted analyses are employed, the code is not available.

And yet, this is easily remedied. Researchers can achieve computational reproducibility through open science approaches, including straightforward steps for archiving data and code openly along with the scientific workflows describing the provenance of scientific results (e.g., Hampton et al. (2015), Munafò et al. (2017)).

6.2.2 Conceptualizing workflows

Scientific workflows encapsulate all of the steps from data acquisition, cleaning, transformation, integration, analysis, and visualization.

Scientific workflows and provenance capture the multiple steps needed to reproduce a scientific result from raw data.

Figure 6.1: Scientific workflows and provenance capture the multiple steps needed to reproduce a scientific result from raw data.

Workflows can range in detail from simple flowcharts (6.1) to fully executable scripts. R scripts and python scripts are a textual form of a workflow, and when researchers publish specific versions of the scripts and data used in an analysis, it becomes far easier to repeat their computations and understand the provenance of their conclusions.

6.3 Why use git?

6.3.1 The problem with filenames

Every file in the scientific process changes. Manuscripts are edited. Figures get revised. Code gets fixed when problems are discovered. Data files get combined together, then errors are fixed, and then they are split and combined again. In the course of a single analysis, one can expect thousands of changes to files. And yet, all we use to track this are simplistic filenames.
You might think there is a better way, and you’d be right: version control.

Version control systems help you track all of the changes to your files, without the spaghetti mess that ensues from simple file renaming. In version control systems like git, the system tracks not just the name of the file, but also its contents, so that when contents change, it can tell you which pieces went where. It tracks which version of a file a new version came from. So its easy to draw a graph showing all of the versions of a file, like this one:

Version control systems assign an identifier to every version of every file, and track their relationships. They also allow branches in those versions, and merging those branches back into the main line of work. They also support having multiple copies on multiple computers for backup, and for collaboration. And finally, they let you tag particular versions, such that it is easy to return to a set of files exactly as they were when you tagged them. For example, the exact versions of data, code, and narrative that were used when a manuscript was submitted might be R2 in the graph above.

6.4 Checking the RStudio environment

6.4.1 R Version

We will use R version 3.5.2, which you can download and install from CRAN. To check your version, run this in your RStudio console:

R.version$version.string

6.4.2 RStudio Version

We will be using RStudio version 1.1.463 or later, which you can download and install here To check your RStudio version, run the following in your RStudio console:

RStudio.Version()$version

If the output of this does not say 1.1.463, you should update your RStudio. Do this by selecting Help -> Check for Updates and follow the prompts.

6.4.3 Package installation

Run the following lines to check that all of the packages we need for the training are installed on your computer.

packages <- c("devtools", "dplyr", "DT", "ggplot2", "leaflet", "roxygen2", "tidyr")
for (package in packages) { if (!(package %in% installed.packages())) { install.packages(package) } }

rm(packages) #remove variables from workspace

If you haven’t installed all of the packages, this will automatically start installing them. If they are installed, it won’t do anything.

Next, create a new R Markdown (File -> New File -> R Markdown). If you have never made an R Markdown document before, a dialog box will pop up asking if you wish to install the required packages. Click yes.

6.5 Setting up git

If you haven’t already, go to github.com and create an account. If you haven’t downloaded git already, you can download it here.

Before using git, you need to tell it who you are, also known as setting the global options. The only way to do this is through the command line. Newer versions of RStudio have a nice feature where you can open a terminal window in your RStudio session. Do this by selecting Tools -> Terminal -> New Terminal.

A terminal tab should now be open where your console usually is. To set the global options, type the following into the command prompt, with your actual name, and press enter:

git config --global user.name "Your Name"

Next, enter the following line, with the email address you used when you created your account on github.com:

git config --global user.email "yourEmail@emaildomain.com"

Note that these lines need to be run one at a time.

Finally, check to make sure everything looks correct by entering this line, which will return the options that you have set.

git config --global --list

6.5.1 Note for Windows Users

If you get “command not found” (or similar) when you try these steps through the RStudio terminal tab, you may need to set the type of terminal that gets launched by RStudio. Under some git install senerios, the git executable may not be available to the default terminal type.

References

Hampton, Stephanie E, Sean Anderson, Sarah C Bagby, Corinna Gries, Xueying Han, Edmund Hart, Matthew B Jones, et al. 2015. “The Tao of Open Science for Ecology.” Ecosphere 6 (July). doi:http://dx.doi.org/10.1890/ES14-00402.1.

Munafò, Marcus R., Brian A. Nosek, Dorothy V. M. Bishop, Katherine S. Button, Christopher D. Chambers, Nathalie Percie du Sert, Uri Simonsohn, Eric-Jan Wagenmakers, Jennifer J. Ware, and John P. A. Ioannidis. 2017. “A Manifesto for Reproducible Science.” Nature Human Behaviour 1 (1): 0021. doi:10.1038/s41562-016-0021.